Encoder (ATSC MPEG-2 HD/SD Encoder)

Specifications

Inputs:

• 2 x HD‐SDI inputs, BNC
• 6 x SD‐SDI inputs, BNC
• 6 x NTSC analog inputs, BNC
• 8 x stereo analog audio inputs
• 4 x AES/PCM digital audio inputs
• 1 x ASI transport stream input, BNC

Video:

• 1920x1080_60i, 1280x720_60p,
  1280x720_30p, 704x480_30p,
  704 x 480_60i resolutions
• MPEG‐2 MP@ML, MP@HL
• 4:2:0 chroma format
• VBR selectable bit rate
• AFD pass through on SDI inputs
• AFD insertion on all video channels
• Video smoothing filter and video noise filter; selectable on a per program basis

Audio:

• Dolby^® Digital encoding
• 24 bit resolution
• Dolby^® Digital 5.1, pass through

Multiplexing & Output:

• 2 x ASI / SMPTE‐310 outputs, mirrored, BNC
• 19.39 Mbps output (ATSC‐OTA),
• 38.8 Mbps max (Cable),
• 80 Mbps with IP Output

Monitor/Control:

• 2 x contact closure input for EAS
• 2 x contact closure outputs for alarms / power monitors
• Front panel LED status indicators
• Web management via Ethernet
• DVI monitor port for at‐a‐glance status of the encoded programs
• 3 x SFP network interfaces

Environmental & Mechanical:

• 0° to 50℃ Temp range
• -40° to 70℃ Temp range (storage)
• Ambient air cooled chassis, fans flow front to back
• < 95% non-condensing humidity
• 19"W x 3.5" H x 18" D
• 110 ~ 240 VAC, 50/60 Hz
• 50W typical (90W max) power
• 10 lbs / 4.5 kg net weight

Recommended Video Encoder Configurations
1080i or 720p60	720p30	480i or 480p30	Total Programs
2	-	-	2
1	1	1	3
1	-	3	4
-	2	3	5
-	-	6-8	6-8

• Page top