Skip to main content

Hitachi Kokusai Electric Inc.

System Configuration Chart

System Configuration Chart

Specifications

SK-HD2200 Camera Head

  SK-HD2200
Imaging Device ( 3x - RGB ) 2/3-inch, 16:9, 2.3 M Pixel. Ultra-Advanced, micro-lens IT-CCD
Effective pixels 1,920 (H) x 1,080 (V)
Optical system F1.4 prism
Optical Filters 2x motorized filter wheel with 5 filter positions
ND CAP, 1 : Clear, 2 : 1/4ND, 3 : 1/16ND, 4 : 1/64ND
CC A : CROSS, B : 3200K, C : 4300K, D : 6300K, E : 8000K
ECC Filters 5600K
Sensitivity F8 @2000lx, 3200K, 89.9% reflectance ( 1080p )
Signal to Noise Ratio 60dB ( 1080i ) ( typical )
Horizontal resolution 1100TVL ( at center )
Depth of modulation 60% ( typical ) ( 800TV Lines at center, 27.5 MHz )
Registration Negligible (excluding lens limitations)
Lens mount BTA
Gain selection L (low) -3, 0dB
M (medium) 0, +3, +6, +9, +12, +15, +18, +21dB
H (high) +3, +6, +9, +12, +15, +18, +21, +24dB
Electronic Shutter 1/100, 1/250, 1/500, 1/1000, 1/2000 ( 1080/59.94p ), AES, CC Frame
1/60, 1/250, 1/500, 1/1000, 1/2000 ( 1080/50p )
Power consumption 41W Head only (without VF, Lens, Ext-output power)
Dimensions 261(W) x 405(H) x 395(D) mm
Mass 19kg, 41.9lbs Camera only (without VF)
Operating temperature -10゚C to +45゚C, 14゚F to 113゚F
Input & Output 2x BNC HD-SDI OUT
1x BNC PROMPT switch-able GENLOCK (analog Tri-level )
4-pin Script +12VDC OUT(0.5A max)
XLR 3-pin MIC-1,2 connector
5-pin AC230V for Prompter Power / Tally out
2x XLR 5-pin INCOM (2-Chnl + PGM Mix)
1x BNC HD-SDI VF out (Character ON/OFF ) or HD-SDI RET out