KP-F140F 145 Mega pixels, 15 frames per second
The IEEE1394.b interface allows direct high speed data transfer between the camera and the PC using a small 8 conductor cable.
The 800 Mbps transfer speed of the IEEE-1394.b interface permits higher frame rates for high resolution cameras.
Feature
IEEE1394.b Interface
· The IEEE1394.b interface allows direct high speed data transfer between the camera and the PC using a small 8 conductor cable.
· The 800 Mbps transfer speed of the IEEE-1394.b interface permits higher frame rates for high resolution cameras.
· Multiple cameras can share the IEEE-1394.b bus using a simple daisy chain connection.
High resolution and high frame rates
KP-F140F, KP-FD140F 1.45 million pixels for high resolution (SXGA) at 15 frames per second. Designed for High Resolution inspection.
KP-F83F 805,000 pixels for a high frame rate of 30 frames per second at standard resolution. Designed for high speed and high resolution inspection.
KP-F32F, KP-FD32F 330,000 pixels for standard resolution (VGA) at a high frame rate of 60 frames per second. Designed for high speed inspection.
Various functions
· Electronic shutter · External sync · Hardwired Trigger · Partial scan
· Daisy chain · Remote control · White balance (color model)
· Independent 6 color masking (color model) · Daisy chain · Remote control
Specification
| Imaging device | 1/2-inch interline CCD | |
|---|---|---|
| Total pixels | 1434 (H)×1050 (V) | |
| Effective pixels | 1392 (H)×1024 (V) | |
| Pixel size | 4.65 µm (H)×4.65 µm (V) | |
| Color filter | — | |
| Scanning system | Progressive scan | |
| Synchronization | Internal / external (auto selection) | |
| Video signal output | Interface | IEEE1394.b (FireWire800) Protocol: IEEE1394-based Digital Camera Specification Version 1.31 compliant Transfer rate: 800 / 400 / 200 Mbps |
| Image format | MONO8 / MONO16 | |
| Image size | 1360(H)×1024(V), 1280(H)×960(V) 1024(H)×768(V), 800(H)×600 (V) 640 (H)×480(V) |
|
| Frame rate | 15fps (Mono8, 1360×1024) | |
| Standard sensitivity | 2000 lx F8 | |
| Gain | Auto / Manual (0 dB to 18 dB) | |
| Electric shutter | Auto (AES) / Manual (VARIABLE) 1/100,000 second to 10 second | |
| External trigger shutter | Mode | Fixed shutter (Mode0), One trigger (Mode1), Reset control (Mode14), VD Sync (Mode15) |
| Input | Software Trigger: 1394 Cable Hardware Trigger: 1394 Cable (Hitachi System) standard model, or 12 pin connector on S2 or S3 model. |
|
| White balance | — | |
| Gamma | OFF / LUT | |
| Masking | — | |
| Saturation | — | |
| Sharpness | Adjustable | |
| Brightness | Adjustable | |
| Time stamp | OFF/ON | |
| Cycle timer sync | OFF/ON | |
| Daisy chain | Possible. Even if there is no repeater. If two are connected, the frame rate become half. | |
| Lens mount | C mount (Flange-back adjustment) | |
| Power supply | Approx. 4.1W (DC+12V) | |
| DC+8V to +30V (Via IEEE1394 cable) or external input via 12 pin connector for S2 and S3 model. | ||
| Ambient temperature | Operating | –10 °C to +50 °C, 30 to 80 %RH Note: If operated continuously, be sure to use at 0 °C to +40 °C (104°F)for long term stable performance. |
| Storage | –20 °C to +60 °C / 20 to 90 %RH | |
| Vibration endurance | 68.56 m/s² (10 to 200 Hz 30 minutes each on XYZ axes) *Please do not add the strong vibration over long time. | |
| Shock endurance | 490.3 m/s² (vertical, horizontal, once each faze) | |
| Dimensions | 44 (W)×44 (H)×48 (D) mm (not including lens) | |
| Mass | Approx. 130 g (not including lens) | |
System configuration
Option
- 1. Tripod Adaptor
- TA-FD140
External dimensions
