KP-F202GV
Direct connection is possible to PC by the Gigabit Ethernet cable. This cable is less bulky compared with parallel digital output cabling.
GigE Cable length can be extended to maximum 100m without hub and switcher.
Feature
Gigabit Ethernet interface
Direct connection is possible to PC by the Gigabit Ethernet cable. This cable is less bulky compared to parallel digital output cabling.
The GigE Cable length can be extended to maximum of 100m without hub and switcher
GigE Vision™ (Ver 1.00) compatible
GigE Vision, the Industrial camera interface standard, provides high speed data transmission at a maximum of 1Gbps which is highly suitable for image processing.
GENiCAM™ (Ver 1.00) compatible
Using the industrial camera control API “GENiCAM“, which is supported by the European Machine Vision Association (EMVA) , the development of camera control system is simplified.
PoE correspondence (except HV-F22GV)
An Ethernet cable provides Power supply (Power over Ethernet).
High resolution & High Frame rate
Color (1CCD, RGB/YUV/RAW/MONO)
Model:KP-FD202GV
CCD:1/1.8
Effective pixels:1628(H)×1236(V)
Frame rate:30 fps *1
Black & White (MONO)
Model:KP-F202GV
CCD:1/1.8
Effective pixels:1628(H)×1236(V)
Frame rate:30 fps
*1: RAW 8bit
High color accuracy (Color Model)
The RGB primary color mosaic filter achieves high color reproduction.
Versatile CCD drive functions
- Preset electronic shutter mode
Multi-step up to 1/50000 second in 8 steps. - Variable electronic shutter mode
Variable at 1H steps from 10 second to approx. 1/100,000 second.
White balance (Color Model)
ATW : Auto-tracking white balance mode
MANUAL : Manual white balance (R, B gain control)
One-Push : Auto adjust function
6 color independent masking (Color Model)
Saturation and hue of primary colors R, G, B and complementary colors Cy, Mg, Ye can be independently varied. It is effective for many applications (Image capture, microscope, etc) needing accurate color reproduction.
Near infrared sensitivity (KP-F145GV)
Extended spectral response allows use of the camera in the near infrared region.
External trigger
An external trigger signal input can be used to capture an image at desired timing for instant view or processing. The software trigger using a Gigabit Ethernet cable and the hardware trigger can deal with all trigger signals.
Versatile output image format (Color Model)
The output format can be selected – RGB 8 / 10 / 12bit, YUV (4:2:2) 8 / 10 / 12bit, RAW 8 / 10 / 12bit or MONO 8 / 10 / 12bit.
Specification
| Imaging device | 1/1.8-inch progressive scan interline CCD | |
|---|---|---|
| Total number of pixels | 1688(H)×1248(V) | |
| No. of effective pixels | 1628(H)×1236(V) | |
| Pixel size | 4.4 µm(H)×4.4 µm(V) (Square pixel) | |
| Scanning area | 7.16 mm(H)×5.44 mm(V) | |
| Scanning system | Progressive | |
| Sync system | Internal / external | |
| Lens mount | C mount | |
| Flange focal distance | 17.526 mm | |
| Video output | Interface | Gigabit Ethernet |
| Protocol | GigE Vision compliant | |
| Transfer rate | 1 Gbit per second | |
| Image format | RGB 8 / 10 / 12bit, YUV (4:2:2) 8 / 10 / 12bit, RAW 8 / 10 / 12bit, MONO 8 / 10 / 12bit | |
| Image size | 1620(H)×1220(V) | |
| Frame rate | 30 frames per second | |
| *Frame rate is different for following format | ||
| RGB 12bit: 33 frames per second | ||
| Sensitivity | 2000 lx, F8, 3200K | |
| Electric shutter speed | OFF/Auto(AES)/Manual(PRESET or VARIABLE),OFF is normal exposure(frame rate) | |
| PRESET | 1/30, 1/60, 1/100, 1/250, 1/1000, 1/2000, 1/10000, 1/50000 second | |
| VARIABLE | From 10 second to approx. 1/100000 second | |
| External trigger shutter | Mode | Fixed shutter,One trigger,VD Sync,Reset control |
| Input | Via Gigabit Ethernet cable (Software trigger),12-pin connector (Hardware trigger) | |
| Input level | 5 to 24 Vp-p | |
| External sync signal | VD output | 5 Vp-p ±0.3 V |
| Strobe out | 5 Vp-p ±0.3 V | |
| Partial scan | Grabbing image area is adjustable at horizontal / vertical | |
| ALC (Auto level control) | Adjustable for video level | |
| Gain | Auto / Manual (0 dB to 18 dB) | |
| Gamma | OFF (γ=1) / ON | |
| Sharpness | Adjustable | |
| Black level | Adjustable | |
| Power supply | DC+12 V plus minus 1 V (input from 12-pin connector),48 V (PoE) | |
| Power consumption | Approx. 7.5 W (DC+12 V) | |
| Ambient temperature | Performance | 0 °C to +40 °C / 90 %RH or less |
| Operating | –10 °C to +50 °C / 90 %RH or less | |
| Storage | –20 °C to +60 °C / 70 %RH or less | |
| Vibration endurance | 98.6 m/s² or less(15 to 200 to 15 Hz, 10 minutes each on XYZ axes) (Do not subject to strong vibration for long periods of time.) | |
| Shock endurance | 490.3 m/s² or less (vertical, horizontal, once each face) | |
| External dimensions | 44(W)×29(H)×72(D) mm (not including lens and protrusions) | |
| Mass | Approx. 140 g (without lens) | |
| Supplied equipment | Camera and CD-ROM (Operation manual / driver software) | |
| Optional accessories | Tripod adaptor (TA-M1),LAN cable (Enhanced category 5 or Category 6) | |
System configuration
Option
- 1 .Tripod adaptor
- TA-M1
- 2. Camera cable
- C-201KSM（2m）
C-501KSM（5m）
C-102KSM（10m） - 3. 12pin plug
- HR10A-10P-12S
- 4. Dummy glass (AR coated)
- ARC1214
External dimensions
- GigE Vision™ and the distinctive logo are trademarks of the AIA(Automated Imaging Association)
- Ethernet is a trademark of XEROX Corporation.
- GENiCAM is trademark of the EMVA(European Machine Vision Association).
