KP-F120 145 Mega pixels, 30 frames per second
Feature
High speed read out
Full pixel independent readout: 30 frames/second (KP-F120), 15 frames/second (KP-F100B).
Partial Scan (except KP-F100B): Read out up to over 190 frames/second max.
High resolution
2/3-inch CCD.
Effective pixels 1392(H)×1040(V) and square lattice pixels.
Near infrared sensitivity (KP-F120)
Extended spectral response allows use of the camera in the near infrared region.
Digital output
EIA-644
Full frame shutter
Higher resolution in the vertical direction is ensured for moving objects.
Multi step electronic shutter
8 steps electronic shutter up to 1/50000 second.
Frame on demand
An external trigger signal input can be used to capture an image at a desired timing for instant view or processing.
RS-232C control
Frame on demand, partial scan, etc. by RS-232C control or rear panel switch.
Specification
| Imaging device | 2/3-inch interline CCD | |
|---|---|---|
| Total pixels | 1432 (H)×1050 (V) | |
| Effective pixels | 1392 (H)×1040 (V) | |
| Pixel size | 6.45 µm (H)×6.45 µm (V) (square lattice) | |
| Sensing area | 8.98mm (H)×6.71 mm (V) | |
| Aspect ratio | 4 : 3 | |
| Frame rate | 30 frames per second (full pixel readout) | |
| Horizontal scanning frequency | 32.07 kHz | |
| Vertical scanning frequency | 30 Hz | |
| Sync system | Internal/external (HD/VD) | |
| Lens mount | C mount (Flange focal distance=17.526 mm | |
| Video output | Digital output (EIA-644) Maximum cable length: 10m or analog output for image checking | |
| External sync input | HD/VD TTL level | |
| Electric shutter | 1/30, 1/60, 1/125, 1/250, 1/1000, 1/2000, 1/10000, 1/50000 second. OFF is normal exposure (frame rate) | |
| Gamma | Γ = 1 | |
| Frame on demand | (A) Fixed shutter (8steps or variable) (B) ONE trigger mode (C) TWO trigger mode (D) Smear reduction mode (E) Partial scan mode | |
| Power supply voltage | 12 ± 1 VDC | |
| Current consumption | Approx. 400 mA | |
| Ambient | Operation | 0 to 40 °C (+32 to +104 °F) , less than 90 % RH |
| Storage | –10 to 50 °C (+14 to +122 °F) , less than 70 % RH | |
| Vibration endurance | 29.4m/s², 10 to 200 Hz 30 minutes each on XYZ axes | |
| Shock endurance | 294 m/s² (vertical, horizontal, once each face) | |
| External dimensions | 58 (W)×58 (H)×48 (D) mm (Not including mount protrusions) | |
| Mass | Approx. 220 g | |
System configuration
Option
- 1. 12 pin plug
- HR10A-10P-12S(01)
- 2. Junction box
- JU-M1A/JU-F1
- 3. Dummy glass (AR coated)
- ARC1214
- 4. Camera cable (Molded type)
- 2m C-201KSM
5m C-501KSM
10m C-102KSM - 5. Tripod adaptor
- KP-F120: TA-F120
KP-F100B: TA-M1
External dimensions
