KP-F100BCL 145 Mega pixels, 15 frames per second
High resolution combined with high frame rates are possible with this series of cameras.Can be used for high-precision and high-speed image processing in many applications.
Feature
High speed read out
Full pixel independent readout: 30 frames/second (KP-F200CL-S1/F120CL), 15 frames/second (KP-F100BCL)
Partial Scan (except KP-F100BCL): Read out up to over 190 frames/second max.
High resolution
2/3-inch CCD (KP-F200CL-S1), 2/3-inch CCD(KP-F120CL, KP-F100BCL) .
Effective pixels 1628(H)×1236(V) (KP-F200CL-S1), 1392(H)×1040(V) and square lattice pixels.
Near infrared sensitivity (KP-F120CL)
Extended spectral response allows use of the camera in the near infrared region.
Digital output
Camera Link
Full frame shutter
Higher resolution in the vertical direction is ensured for moving objects.
Multi step electronic shutter
8 steps electronic shutter up to 1/50000 second.
Frame on demand
An external trigger signal input can be used to capture an image at a desired timing for instant view or processing.
Remote control
Frame on demand, partial scan, etc. by remote control or rear panel switch.
Specification
| Imaging device | 2/3-inch interline CCD | |
|---|---|---|
| Total pixels | 1432 (H)×1050 (V) | |
| Effective pixels | 1392 (H)×1040 (V) | |
| Pixel size | 6.45 µm (H)×6.45 µm (V)(square lattice) | |
| Sensing area | 8.98 mm (H)×6.71 mm (V) | |
| Aspect ratio | 4 : 3 | |
| Frame rate | 15 frames per second (full pixel readout) | |
| Horizontal scanning frequency | 16.0 kHz | |
| Vertical scanning frequency | 15 Hz | |
| Sync system | Internal/external (HD/VD) | |
| Lens mount | C mount (Flange focal distance=17.526 mm | |
| Video output | Digital output (CameraLink) Maximum cable length: 10m or analog output for image checking | |
| External sync input | HD/VD LVDS level | |
| Electric shutter | 1/30, 1/125, 1/250, 1/1000, 1/2000, 1/4000, 1/10000, 1/50000 second. OFF is normal exposure (frame rate: 1/15) | |
| Gamma | γ = 1 | |
| Frame on demand | (A) Fixed shutter (8steps or variable) (B) ONE trigger mode (C) TWO trigger mode | |
| Power supply voltage | 12 ± 1 VDC | |
| Current consumption | Approx. 320 mA | |
| Ambient | Operation | 0 to 40 °C (+32 to +104 °F) , less than 90 % RH |
| Storage | –10 to 50 °C (+14 to +122 °F) , less than 70 % RH | |
| Vibration endurance | 29.4m/s², 10 to 200 Hz 30 minutes each on XYZ axes | |
| Shock endurance | 294 m/s² (vertical, horizontal, once each face) | |
| External dimensions | 44 (W)×44 (H)×78 (D) mm (Not including mount protrusions) | |
| Mass | Approx. 180 g | |
System configuration
Option
- 1. 12 pin plug
- HR10A-10P-12S(01)
- 2. Junction box
- JU-M1A/JU-F1
- 3. Dummy glass (AR coated)
- ARC1214
- 4. Camera Link Cable
- 5. Camera cable (Molded type)
- 2m C-201KSM
5m C-501KSM
10m C-102KSM - 6. Tripod adaptor
- KP-F200CL-S1/F120CL: TA-F120
KP-F100BCL: TA-M1
External dimensions
