KP-M3A

Feature
High sensitivity, high resolution and high performance
Line up 2/3, 1/2, 1/3 inch CCD models
Near infrared sensitivity (KP-M2R)
Specification
| Imaging device | 1/2-inch interline CCD | |
|---|---|---|
| Total pixels | EIA: 811 (H)×508 (V) CCIR: 795 (H)×596 (V) | |
| Effective pixels | EIA: 768 (H)×494 (V) CCIR: 752 (H)×582 (V) | |
| Pixel size | EIA: 6.35 µm (H)×7.4 µm (V) CCIR:6.5 µm (H)×6.25 µm (V) | |
| Sensing area | EIA: 4.88 mm (H)×3.66 mm (V), CCIR: 4.89 mm (H)×3.64 mm (V) | |
| Scanning frequency | Horizontal; EIA:15.734KHz, CCIR:15.625KHz Vertical; EIA: 59.94Hz , CCIR: 50Hz | |
| Sync system | Internal/external (auto selection) | |
| Lens mount | C mount (Flange focal distance=17.526 mm | |
| Video output | 1.0Vp-p 75Ω Un-baranced Video: 0.7Vp-p sync : 0.3Vp-p negative | |
| Horizontal resolution | EIA: 570TV Line CCIR: 560TV Line | |
| Sensitivity | 400 lx (F8, Max. gain, 3200K) | |
| Minimum illumination | 0.3 lx (F1.4, AGC, Gamma ON, without IR cut filter) | |
| Signal noise to ratio | 56 dB | |
| External sync input | Input; HD/VD 2 to 6V DC negative, frequency deviation: ±1%, Impedance: 75Ω or high impedance | |
| Electric shutter | 1/100 (EIA), 1/120 (CCIR), 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000, second. OFF is normal exposure | |
| Gamma | γ = 1 or adjustable | |
| Accumulate mode | Filed of flame accumulate | |
| Power supply voltage | 12 ± 1 VDC | |
| Power consumption | Approx. 1.4 W | |
| Ambient | Operation | –10 to 50 °C (+14 to +122 °F) , less than 90 % RH |
| Storage | –20 to 60 °C (–4 to +140 °F) , less than 70 % RH | |
| Vibration endurance | 98 m/s² (Acceleration: constant) 10 to 200 Hz, sweep: 10 minutes, XYZ 30 minutes | |
| Shock endurance | 686 m/s² (Drop test, once each top, bottom, left and right) | |
| External dimensions | 44 (W)×29 (H)×72 (D) mm | |
| Mass | Approx. 55 g | |
System configuration

Option
- 1. 12 pin plug
- HR10A-10P-12S(01)
- 2. Junction box
- JU-M1A
- 3. Dummy glass (AR coated)
(KP-M2R: built-in camera body) - ARC1214
- 4. Camera cable (Molded type)
- 2m: C-201KSM
5m: C-501KSM
10m: C-102KSM - 5. Tripod adaptor
- TA-M1
External dimensions
