KP-F80 81 Mega pixels, 30 frames per second
Feature
Compact body
29 (W)×29 (H)×38.5 (D) mm
High resolution & high frame rate
KP-F30: VGA (Effective: 659(H)×494(V)), 60 fps
KP-F33: VGA (Effective: 659(H)×494(V)), 30 fps
KP-F38: VGA (Effective: 659(H)×494(V)), 80 fps
KP-F80: XGA (Effective: 1034(H)×779(V)), 30 fps
Specification
| Imaging device | 1/3-inch interline CCD | |
|---|---|---|
| Total pixels | 1077 (H)×788 (V) | |
| Effective pixels | 1034 (H)×779 (V) | |
| Pixel size | 4.65 µm (H)×4.65 µm (V) (square lattice) | |
| Sensing area | 4.81 mm (H)×3.62 mm (V) | |
| Aspect ratio | 4 : 3 | |
| Frame rate | 30 frames per second | |
| Horizontal scanning frequency | 23.622 kHz | |
| Vertical scanning frequency | 29.83 Hz | |
| Sync system | Internal/external (auto selection) | |
| Lens mount | C mount (Flange focal distance=17.526 mm | |
| Video output | 1.0Vp-p 75Ω Un-barances Video: 0.7Vp-p Sync : 0.3Vp-p negative | |
| Horizontal resolution | 800 TV Line | |
| Sensitivity | 400 lx (F4, with IR cut filter, 3200K) | |
| Minimum illumination | 1.0 lx (F1.4, Max. gain, without IR cut filter) | |
| Signal noise to ratio | 54 dB | |
| External sync input | Switchable by external switch Input; HD/VD 4 to 6V DC negative, frequency deviation: ±1%, Impedance: 75Ω or high impedance Output; HD/VD 5V DC negative, Impedance: 100Ω | |
| Electric shutter | 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000, 1/50000 second. OFF is normal exposure (frame rate) | |
| Gamma | γ = 1 | |
| Frame on demand | (A) Fixed shutter (B) ONE trigger mode (C) Reset control mode (D) Partial scan mode (option) | |
| Power supply voltage | 12 ± 1 VDC | |
| Power consumption | Approx. 2.2 W | |
| Ambient | Operation | –10 to 50 °C (+14 to +122 °F) , less than 90 % RH |
| Storage | –20 to 60 °C (–4 to +140 °F) , less than 70 % RH | |
| Vibration endurance | 98 m/s² (Acceleration: constant) 10 to 200 Hz, sweep: 10 minutes, XYZ 30 minutes | |
| Shock endurance | 686 m/s² (Drop test, once each top, bottom, left and right) | |
| External dimensions | 29 (W)×29 (H)×38.5 (D) mm (Not including protrusions) | |
| Mass | Approx. 55 g | |
System configuration
Option
- 1. 12 pin plug
- HR10A-10P-12S(01)
- 2. Junction box
- JU-F30
- 3. Dummy glass (AR coated)
- ARC1214
- 4. Camera cable (Molded type)
- 2m C-201KSM
5m C-501KSM
10m C-102KSM - 5. Tripod adaptor
- TA-F30
External dimensions
